If you’re wondering whether to paint over your vinyl siding in Conroe, Texas, you’re not alone.
Vinyl remains one of the most popular and budget-friendly choices for many home exteriors in Conroe, Texas.
The material is low-maintenance and has gotten better over the years, thanks to the advancement in technology.
Yes, You Can Paint Vinyl Siding
Even though vinyl siding is the most commonly used building material for exterior use, many homeowners are unaware that it can be repainted.
By giving a second breath to your vinyl siding, you enhance the exterior of your home besides getting a much cheaper solution than installing a new siding.
With wood, you must take into account many factors that do not apply to vinyl or aluminum, such as the dryness of the wood, its level of wear, and if all things considered a stain is preferable to painting.
However, with vinyl, what matters is to make sure the surface is clean before painting it.
Use a washing brush with detergent mixed with water.
Or if the surface is very dirty and you want to minimize your efforts, rent a powerful pressure washer.
If you choose a pressure washer, use moderate settings so as not to damage the siding or to ruin a paint job is still in good condition.
Most vinyl repainting projects can be a little complicated if you don’t have the skills, time, and the right tools for the job.
Therefore, hiring a professional painting contractor for exterior home painting in Conroe, TX, is always the smartest choice.
However, if you want to give DIY vinyl painting a try, here are the general steps you should keep in mind.
Step 1: Clean the Vinyl Siding
As earlier mentioned, before painting, the surface must be thoroughly cleaned to remove mold, chalking dust or dirt that can prevent maximum adhesion of the paint.
TIP: The best way to clean vinyl siding is to scrub it by hand or wash it under pressure. Consider using an all-purpose cleaner like the Clean-K318
Whichever cleaner is used, it is essential to rinse the surface thoroughly with clean water and allow it to dry before applying the primer or paint.
Step 2: Prime the Vinyl Siding
In some cases, a primer might not be necessary. This is especially so if you’re painting a relatively intact siding or using self-priming paints.
TIP: Textured or porous areas should always be covered with a primer. Also, if your previous paint job is in bad condition, sanding and priming are important.
Step 3: Choose the Best Color
While you can use pretty much any color in your exterior siding, there is a range of paint colors that look better on siding material.
Check with your local paint store for some advice.
TIP: If you’re hiring a painting contractor like Streamline Painting & More, we can help you choose the best colors and the most suitable type of paint for your project.
Step 4: Paint the Vinyl Siding
Generally, it is recommended to apply two coats of paint to an exterior surface, but always follow the directions on the container.
• Avoid applying too much paint.
• Use a sprayer, brush, or roller.
• The vinyl siding does not retain water, so it is easy to clean and dries quickly.
TIP: Avoid applying paint in direct sunlight – the surface should not be warm to the touch – or when the ambient and surface temperatures are below 4.4° C (40° F).
Need Help To Repaint Your Vinyl siding?
As mentioned before, exterior painting is a difficult, technical, and time-consuming process.
If you need professional help with your residential painting project in The Woodlands, TX, or Conroe, TX, our team at Streamline Painting & More can assist.
To try us, book a FREE estimate below or call us on 936-718-8354 for more details.